Lubricants & Metalworking — Corrosion Protection
Rust Preventative
Industrial / Technical Grade — Solvent-Based
Petroleum solvent-based rust preventative for in-process and long-term storage protection of machined parts, steel fabrications, oilfield tubulars, and military equipment.
Product Type
Solvent-Based RP
Flash Point
Above 38 °C
Film Type
Thin dry film
Pack Sizes
Drums · Totes · Pails
Film Diagram
Petroleum solvent carrier with corrosion inhibitor package
Safety & Regulatory
- NFPA Health
- 1 — Slight hazard
- NFPA Flammability
- 2 — Moderate hazard
- NFPA Reactivity
- 0 — Stable
- Flash Point
- Above 38 °C (100 °F) — Flammable
- OSHA PEL (vapor)
- 100 ppm (mineral spirits)
- DOT Hazard Class
- 3 — Flammable Liquid
- UN Number
- UN 1993
- Packing Group
- III
Grades & Packaging
Available Grades
Pack Sizes
Also Known As
Physical & Chemical Properties
| Product Type | Solvent-based rust preventative |
| Carrier | Petroleum solvent (mineral spirits base) |
| Film Type | Thin, dry to slightly oily film |
| Application Methods | Dip, spray, brush |
| Flash Point | Above 38 °C (100 °F) — Flammable |
| Protection Duration | 6–24 months indoor (film-dependent) |
| Metal Compatibility | Ferrous metals — steel, cast iron |
| Removal | Solvent wash or alkaline cleaner |
| Appearance | Clear to amber liquid |
| Density | ~0.80 g/cm³ at 15 °C |
| VOC Content | Higher — solvent-based carrier |
| Dry Film Thickness | 0.5–2.0 microns (spray application) |
Industrial Applications
Metal Fabrication & Stamping
Rust preventatives protect stamped and fabricated steel parts during in-process storage and transit at Texas metal fabrication shops. Applied by dip or spray after forming operations.
Oilfield Equipment & Tubular Goods
Used to protect drill pipe, casing, and oilfield equipment from corrosion during storage and shipment in the Texas oilfield supply chain. Compatible with standard thread compound application.
Automotive Parts Manufacturing
Applied to machined and stamped automotive parts to prevent rust during in-process storage and finished goods warehousing at Texas automotive suppliers.
Military & Defense Equipment
MIL-spec rust preventatives are used to protect military equipment, weapons, and vehicles during long-term storage. Thin dry film leaves surfaces clean for subsequent operations.
Export Packaging
Applied to metal goods before export packaging to provide corrosion protection during ocean freight transit and extended storage in humid environments.
Maintenance & Repair
Used in industrial maintenance operations to protect stored spare parts, tooling, and equipment from corrosion during extended storage periods.
Why Source Rust Preventative from Texas-Chem?
- Thin dry film — leaves clean, non-tacky surface suitable for subsequent operations
- 6–24 months indoor protection depending on film thickness and application method
- Suitable for oilfield tubular goods, machined parts, and military equipment preservation
- SDS, COA, and technical data sheets on every order
- Nationwide delivery from Fort Worth, TX — drums and totes
Frequently Asked Questions — Rust Preventative
How long does rust preventative protect steel parts?▾
Protection duration depends on film thickness, application method, and storage conditions. Thin spray films provide 6–12 months indoor protection. Heavy dip coatings provide 12–24 months or longer. Outdoor or humid storage requires heavier films or additional packaging (VCI bags, sealed containers). Contact Texas-Chem at 855-TEX-CHEM for application-specific recommendations.
How do I remove rust preventative before machining or painting?▾
Solvent-based rust preventatives are removed with petroleum solvent (mineral spirits, naphtha) or alkaline aqueous cleaners. For painting, ensure complete removal of the RP film — residual oil contamination will cause paint adhesion failure. Alkaline cleaning followed by water rinse is the preferred pre-paint cleaning process.
Is rust preventative suitable for oilfield tubular goods?▾
Yes. Texas-Chem supplies rust preventative used for protecting drill pipe, casing, and oilfield tubular goods during storage and shipment. The product meets the requirements for tubular goods storage protection and is compatible with standard thread compound application.
Can rust preventative be applied over existing rust?▾
No. Rust preventative is a corrosion inhibitor, not a rust converter or primer. It must be applied to clean, rust-free metal surfaces. Existing rust must be removed by mechanical cleaning (wire brushing, blasting) or chemical treatment before applying rust preventative.