Lubricants & Metalworking — Soluble Oil Concentrate
Cutting Fluid Concentrate
Industrial / Technical Grade — Dilutes 1:10 to 1:40
Biostable soluble oil concentrate for CNC machining, turning, milling, and grinding. Forms a stable milky emulsion with water for cooling, lubrication, and chip removal.
Product Type
Soluble Oil Concentrate
pH (working)
8.5–9.5
Dilution
1:10 to 1:40
Pack Sizes
Drums · Totes · Bulk
Emulsion Diagram
Emulsifiable oil concentrate — forms oil-in-water emulsion on dilution
Safety & Regulatory
- NFPA Health
- 1 — Slight hazard
- NFPA Flammability
- 1 — Slight hazard (concentrate)
- NFPA Reactivity
- 0 — Stable
- OSHA PEL (mist)
- 5 mg/m³ (oil mist)
- ACGIH TLV (mist)
- 5 mg/m³ TWA
- DOT Hazard Class
- Not regulated
- Skin Sensitization
- Possible with prolonged exposure
Grades & Packaging
Available Grades
Pack Sizes
Also Known As
Physical & Chemical Properties
| Product Type | Soluble oil concentrate (emulsifiable) |
| Dilution Ratio | 1:10 to 1:40 with water |
| Appearance (concentrate) | Amber to brown opaque liquid |
| Appearance (emulsion) | Milky white emulsion |
| pH (working solution) | 8.5–9.5 |
| Refractometer Factor | ~1.0 (varies by grade) |
| Biostability | Biostable — extended sump life |
| Foam | Low-foam formulation |
| Flash Point (concentrate) | Above 93 °C (200 °F) |
| Density | ~0.90 g/cm³ at 15 °C |
| Metal Compatibility | Ferrous and non-ferrous metals |
| Chlorine / Active Sulfur | None — safe for non-ferrous metals |
Industrial Applications
CNC Machining & Precision Parts
Used in CNC machining centers, lathes, and milling operations across Texas precision manufacturing facilities. Provides cooling, lubrication, and chip flushing for high-speed cutting operations.
Aerospace & Defense Manufacturing
High-performance cutting fluids are required for titanium, aluminum, and high-strength steel machining in aerospace manufacturing. The low-foam formulation is compatible with high-pressure coolant delivery systems.
Automotive Parts Manufacturing
Used in high-volume automotive parts machining, grinding, and forming operations at Texas automotive suppliers. Biostable formulation reduces sump maintenance frequency.
Oil & Gas Equipment Manufacturing
Cutting fluids are essential for machining drill bits, downhole tools, and pressure equipment for the Texas oilfield equipment industry.
Job Shop & General Machining
Single concentrate serves multiple machining operations — dilute 1:10 for heavy roughing, 1:40 for light finishing and grinding — reducing the number of products a shop needs to stock.
Grinding & Surface Finishing
Low-foam formulation is preferred for surface grinding, cylindrical grinding, and honing operations where foam buildup in the coolant sump is a concern.
Why Source Cutting Fluid from Texas-Chem?
- Biostable formulation — extended sump life, reduced maintenance
- Suitable for ferrous and non-ferrous metals including aluminum, brass, and copper alloys
- Low-foam formula — compatible with high-pressure coolant delivery systems
- SDS, COA, and technical data sheets on every order
- Nationwide delivery from Fort Worth, TX — drums, totes, and bulk
Frequently Asked Questions — Cutting Fluid Concentrate
What dilution ratio should I use for my machining operation?▾
Heavy-duty roughing cuts on steel and cast iron typically use 1:10 to 1:20 dilution (5–10% concentration). General machining and turning uses 1:20 to 1:30 (3–5%). Light finishing, grinding, and aluminum machining uses 1:30 to 1:40 (2.5–3%). Use a refractometer to verify concentration in the sump. Contact Texas-Chem at 855-TEX-CHEM for application-specific recommendations.
How do I maintain cutting fluid sump life?▾
Key sump maintenance practices: check and adjust concentration weekly with a refractometer; maintain pH above 8.5 to inhibit bacterial growth; remove tramp oil with a skimmer; clean the sump and recharge with fresh fluid every 6–12 months. The biostable formulation supplied by Texas-Chem extends sump life significantly compared to conventional soluble oils.
Is this cutting fluid suitable for aluminum machining?▾
Yes. The cutting fluid concentrate supplied by Texas-Chem is formulated for both ferrous and non-ferrous metals including aluminum, brass, and copper alloys. It does not contain active sulfur or chlorine that can stain or corrode non-ferrous metals.
What is the difference between soluble oil and semi-synthetic cutting fluid?▾
Soluble oil (emulsifiable oil) contains 60–80% mineral oil and forms a milky emulsion. Semi-synthetic contains 5–30% mineral oil plus synthetic components and forms a translucent microemulsion. Semi-synthetics offer better cooling, cleaner sumps, and longer life, but at higher cost. Soluble oil provides better lubrication for heavy-duty operations.