CAS 64741-49-7 · Petroleum Distillate
Mineral Spirits
White Spirit / Stoddard Solvent · C₉–C₁₂ Petroleum Distillate
The most widely used petroleum-based solvent for paints, coatings, and industrial cleaning. Mineral spirits' slow evaporation, broad compatibility, and low cost make it the go-to thinner and degreaser across construction, manufacturing, and maintenance. Texas-Chem supplies standard and low-odor grades in drums, totes, and bulk.
Composition
C₉–C₁₂ Hydrocarbons
Boiling Range
150–200 °C
Solubility
Practically insoluble
Pack Sizes
Drums · Totes · Bulk
Composition Diagram
Complex mixture of C₉–C₁₂ aliphatic, alicyclic, and aromatic hydrocarbons from petroleum distillation
Safety & Regulatory
- NFPA Health
- 1 — Slight hazard
- NFPA Flammability
- 2 — Moderate hazard
- NFPA Reactivity
- 0 — Stable
- OSHA PEL (TWA)
- 500 ppm (2,900 mg/m³)
- ACGIH TLV (TWA)
- 100 ppm
- DOT Hazard Class
- 3 — Combustible Liquid
- UN Number
- UN 1300
- Packing Group
- III
Combustible liquid — store away from heat and ignition sources. Always consult the current Safety Data Sheet before handling.
Grades & Packaging
Available Grades
Pack Sizes
Physical & Chemical Properties
| Composition | C₉–C₁₂ aliphatic/alicyclic hydrocarbons |
| CAS Number | 64741-49-7 |
| Boiling Range | 150–200 °C (302–392 °F) |
| Flash Point | 38–62 °C (100–144 °F) — Combustible |
| Density | 0.760–0.800 g/cm³ at 20 °C |
| Vapor Pressure | 0.1–0.5 kPa at 20 °C |
| Solubility in Water | Practically insoluble |
| Aromatic Content | 14–22% (standard); <1% (dearomatized) |
| Evaporation Rate | Slow (relative to diethyl ether = 1) |
| Auto-ignition Temp. | ~260 °C (500 °F) |
| Explosive Limits | 0.8% – 6.5% (v/v in air) |
| Color | Water-white to pale yellow |
Industrial Applications
Paint Thinner
The most widely used paint thinner for oil-based paints, alkyd enamels, and varnishes. Slow evaporation improves brush flow and leveling.
Metal Degreasing
Effective degreaser for metal parts, machinery, and tooling. Removes oils, greases, and light waxes without aggressive attack on most substrates.
Cleaning & Maintenance
General-purpose cleaner for brushes, rollers, spray equipment, and industrial surfaces. Low-odor grades preferred for enclosed spaces.
Asphalt & Bitumen
Solvent for bituminous coatings, roofing compounds, and asphalt-based sealants in construction and waterproofing applications.
Lubricants & Waxes
Carrier solvent in furniture polishes, car waxes, and industrial lubricant formulations requiring slow evaporation.
Pesticide Formulations
Carrier and diluent in oil-based pesticide concentrates and emulsifiable concentrate (EC) formulations for agricultural use.
Why Source Mineral Spirits from Texas-Chem?
- 35+ years supplying petroleum solvents to Texas manufacturers
- Standard, low-odor, and dearomatized grades available
- Flexible packaging from 55-gal drums to bulk tanker delivery
- Competitive pricing backed by top-tier producer relationships
- Technical support and SDS documentation with every order
- Same-day quotes for standard quantities
Frequently Asked Questions
What are mineral spirits used for in industrial and manufacturing applications?▾
Mineral spirits (also known as Stoddard solvent or white spirits) is a petroleum-derived solvent widely used for degreasing metal parts, thinning oil-based paints and varnishes, cleaning industrial equipment, and as a carrier solvent in coatings and lubricants. It is a lower-toxicity alternative to aromatic solvents like xylene and toluene for applications where a slower-evaporating, moderate-solvency solvent is needed. Chemical & Filtration Products of Texas supplies industrial-grade mineral spirits with full SDS documentation and lot traceability. Contact us at 855-TEX-CHEM for current pricing.
What is the difference between regular mineral spirits and odorless mineral spirits?▾
Regular mineral spirits contains aromatic hydrocarbons that give it a stronger petroleum odor, while odorless mineral spirits has been further refined to remove most aromatics, resulting in a product with lower odor and lower toxicity — though it retains similar solvency characteristics. Odorless mineral spirits is preferred in enclosed work environments, woodworking shops, and applications where worker exposure concerns are a priority. We supply both formulations; contact us at 855-TEX-CHEM to confirm which fits your facility's requirements.
Can I order bulk mineral spirits for a coatings or paint manufacturing operation?▾
Yes. We supply mineral spirits in bulk to coatings manufacturers, paint producers, and industrial maintenance operations across Texas, in quantities from single drums through bulk tanker deliveries. Mineral spirits is a cost-effective solvent for paint thinning, equipment cleaning, and carrier applications. Orders include SDS documentation and full lot traceability. Contact us at 855-TEX-CHEM or [email protected] to request a quote for your volume.
What flash point grades of mineral spirits are available?▾
Mineral spirits is commonly available in two flash point grades: regular mineral spirits with a flash point around 40°C (104°F) and high flash mineral spirits with a flash point above 61°C (142°F). High flash mineral spirits is preferred in environments where fire safety regulations require higher flash point materials. We can confirm which flash point specification is available for your application. Contact us at 855-TEX-CHEM for current grade availability.
What manufacturers supply the mineral spirits you distribute?▾
We source mineral spirits from top-tier petrochemical manufacturers including ExxonMobil and other major producers, ensuring consistent quality and purity specifications across every lot. Manufacturer sourcing is documented in the lot records accompanying every shipment, supporting your quality assurance and compliance processes. Contact us at 855-TEX-CHEM to confirm current manufacturer availability for your order.